Saturday Classes
Saturday Classes
Saturday Morning 9:00-12:00
 |
Class Code: SAM-MD Turquoise & Silver Pendant and Earrings *this is a full day class
9am to 4pm
Instructor: Maria Dellos
www.mariasartcreations.com
Level: All
Description: Students in this class will
receive jammed packed teaching of Maria’s techniques and product use. I
am responsible for introducing Ink Dyes to the Gourd Art Market so I
will teach you how to properly use ink dyes and other related products.
You will learn to make your own templates, how to use rubberstamps on
gourds and the transfer method I developed with masking tape. There is
wood burning and some carving involved in this class and you do not need
experience to follow my teaching but those with experience will learn a
lot of new techniques that will help you with creating your artwork in
half the time. I will teach you many techniques described in my book
which will help you with visual learning. You will also receive product
samples to use during class and other surprises to take home. Stringing
the beads will be the finish to this easy and attractive jewelry set.
Plan on having a really good time learning and socializing in this
class.
Materials/Tools Supplied by Instructor: All
products and embellishments to complete this jewelry class are supplied
and some tools will be available to share when needed. I will come
prepared to sell my products and supplies to those who wish to purchase
items for class needs and festival shopping. You will receive product
samples and other fun items to take home with you.
Materials/Tools Required by students: A bottle
gourd, recommending a 6-7 “. Wood burning tool is a must have, for those
who do not have one, the Versa Tool is a good starter tool, you can find
it in JoAnn’s or Michaels. If you have any tools related to your gourd
art needs please bring them. I am flying from Tucson and have
limitations to how much can be transported and I appreciate your help
with bringing what you are comfortable using during your cutting and
cleaning of gourds. What I do have to offer will be shared by others and
will cause delays but I am very patient and I hope you will be too. Baby
wipes are a must and if you have a heat tool for rubber stamping, please
bring it, I will have a few to share for those who do not have one.
Please bring a dust mask and if you have any special needs, please let
me know when you commit to this class so I may prepare for your needs.
Heavy Duty x-acto knife and needle nose pliers are needed. I sell the
knives and blades if you need to purchase one, please wait until the day
of the class.
This class is all day and I recommend you bringing lunch or snacks and
beverages for the day. We will break for lunch and you can snack anytime
you want. I am available for staying longer than class time for those
who need more time or need more assistance.
Fee: $75
|
 |
Class Code: SAM-BP Chip Carved Birdhouse
Instructor: Bill Peoples
Level: Beginner
Description: Learn to use a wood gouge to carve a heart shaped
pattern on to the surface of a gourd. By chipping away bits of
gourd in a predetermined pattern, elaborate designs occur. This
technique can be used on gourd birdhouses, bowls and ornaments.
Materials/Tools Supplied: Gourd, pattern, protective cover-up,
latex gloves, shoe polish, leather cord, Band-aids. Gouges will be
available for use during class, but students are encouraged to bring
their own. Recommended tools are the Ramelson Chip Carving Knife
#9 sweep (1/4" or 5/16") or Flexcut #8 sweep (1/4" or 3/8")
Materials/Tools Required: None, a gouge if you have one.
Fee: $28
|
 |
Class Code: SAM-SD Easy Power Carving
Instructor: Susan Davis
Level: Beginners to Intermediate
Description: Learn to use a Dremel to cut away from your
pattern to make it 3D after carving we will show you a simple paint wash
to give it detail. If time allows we will use wire to make a
design for the rim.
Materials/Tools Supplied by instructor: Everything except (see
below)
Materials/Tools Required by students: Mask, safety glasses,
power tool, 7 inch clean thick gourd at least 8" round flat bottom
gourd, cutting bits, small and large, & needle nose pliers.
Fee: $40
|
 |
Class Code: SAM-CS
Decoupage Dried Flower Bowl with Rim
Instructor: Crystal Snook
Level: All
Description: Real dried flowers will be decoupaged to a
gourd bowl and will finish with a yarn rim of your choice.
Materials/Tools Supplied by instructor: All
Materials/Tools Required by students: None!
Fee: $35 |
 |
Class Code: SAM-MB Undulating Weaving
*this is a full day class
Instructor: Marianne Barnes
www.maribasket.com
Level: All
Description: Weave directly on top of a thick gourd.
Learn triple twine, turn backs and braided border. Weave with
cedar bark, fibers, round reed, seagrass rope, etc. Decorate with
philodendron sheath pods, etc. Learn how to weave hills and
valleys. This is a beautiful gourd with endless possibilities.
You will love it! The dreamcatcher will not be made in this class,
but you will receive instruction in the pattern packet. Extra kits
will be available for sale.
Materials/Tools Supplied by instructor: Gourd, cleaned
and holes drilled, all weaving materials, pattern packet
Materials/Tools Required by students: Bucket to soak
materials, spray bottle, scissors
Fee: $65
|
Saturday
Afternoon 1-4
 |
Class Code: SPM-MH Seagrass Coiling
Instructor: Mary Hooks
Level: Beginner
Description: Coil on an open gourd, connect around the top and
integrate a different color of coil.
Materials/Tools Supplied by instructor: Everything
Materials/Tools Required by student: Nothing!
Fee: $35
|
 |
Class Code: SPM-HO Gourd Basics
Instructor: Helen Olena
Level: Beginner
Description: Through demonstration, pictures, show and tell
and hands-on experience, beginners learn how to choose, clean, cut and
prepare a gourd for crafting. Each participant will apply leather
dye to a gourd and prepare the top for a variety of cording treatments.
Participants should be able to finish with a small, completed gourd
bowl.
Materials/Tools Supplied: Everything except- see below
Materials/Tools Required: Dust mask or respirator,
rubber gloves, craft apron, melon baller, awl or ice pick, and an exacto
knife with a sharp blade
Fee: $20
|
 |
Class Code: SPM-SD Easy Power Carving
Instructor: Susan Davis
Level: Beginners to Intermediate
Description: Learn to use a Dremel to cut away from your
pattern to make it 3D after carving we will show you a simple paint wash
to give it detail. If time allows we will use wire to make a
design for the rim.
Materials/Tools Supplied by instructor: Everything except (see
below)
Materials/Tools Required by students: Mask, safety glasses,
power tool, 7 inch clean thick gourd at least 8" round flat bottom
gourd, cutting bits, small and large, & needle nose pliers.
Fee: $40
|
Back to
Workshops
See Friday Classes
|